Hardware Sequencing of Inflatable Nonlinear Actuators for Autonomous Soft Robots

The interaction between nonlinear balloon‐type actuators and interconnecting flow restrictions enables arbitrary actuator sequencing. This hardware sequencing enables the multitude of pressure supply tubes in inflatable soft robotics to be cut down. An eight‐degree‐of‐freedom walking robot is tested to demonstrate this hardware sequencing strategy.

Abstract

Soft robots are an interesting alternative for classic rigid robots in applications requiring interaction with organisms or delicate objects. Elastic inflatable actuators are one of the preferred actuation mechanisms for soft robots since they are intrinsically safe and soft. However, these pneumatic actuators each require a dedicated pressure supply and valve to drive and control their actuation sequence. Because of the relatively large size of pressure supplies and valves compared to electrical leads and electronic controllers, tethering pneumatic soft robots with multiple degrees of freedom is bulky and unpractical. Here, a new approach is described to embed hardware intelligence in soft robots where multiple actuators are attached to the same pressure supply, and their actuation sequence is programmed by the interaction between nonlinear actuators and passive flow restrictions. How to model this hardware sequencing is discussed, and it is demonstrated on an 8‐degree‐of‐freedom walking robot where each limb comprises two actuators with a sequence embedded in their hardware. The robot is able to carry pay loads of 800 g in addition to its own weight and is able to walk at travel speeds of 3 body lengths per minute, without the need for complex on‐board valves or bulky tethers.

https://ift.tt/2KtJ5Td